[NWPUG Logo]

North West Packet User Group

Flexnet-We route everything

RMNC/FlexNet Kits and PCBs available from NWPUG.

The following RMNC pcb's and kits are available from NWPUG. These PCB's are imported direct from the BayCom team and further information can be obtained from:-

Phil Jones G6IIM
12 Coronation Drive
Bromborough
Wirral
CH62 3LF

Tel: 0151 334 2452 (between 19.00 & 21.00 please).

For information via the Internet on Flexnet please see

  • Flexnet home page

    • Items can be obtained by mail order on SPECIAL ORDER only, please confirm stock availability by ringing above number before sending your order in the post.

    Please note that an RMNC channel card contains the etches for a 6809 based processor plus AFSK (1K2 bps) or FSK (9K6-76K8 bps) modem or MAX232 kiss port. One master processor card (without modems) is required per node.

    A minimum 2 port RMNC node would consist of 3 X Channel cards (1 Master and 2 slaves), 1 X reset card, one backplane and associated racking/power supply and an optional bus monitor card.

    These items are supplied at cost price only to encourage the development of RMNC/FlexNet nodes in the UK.

    RMNC3/Flexnet hardware supplied at cost (approx price and special order only) Last updated on Tuesday 22nd September 1998.

    Cat.No. Description Price
    9400 RMNC3 Channel Card full kit and PCB £76.00 (B)
    9410 1200Bd AFSK modem for RMNC3 £25.00 (A)
    9420 9K6 - 76K8 Bd switchable FSK modem for RMNC3 £50.00 (B)
    9401 RMNC3 Channel Card PCB £18.00 (A)
    9430 RMNC3 Reset card, full kit and PCB £25.00 (B)
    9440 RMNC3 Bus monitor card, full kit and PCB £25.00 (B)
    9450 RMNC3 backplane £17.00 (B)

    Postage and packaging for individual items marked (A) = £0.50 (B) = £1.00 (C) = £1.50

    All cheques must be made payable to the North West Packet User Group or NWPUG.

    [Baycom Logo] The North West Packet User Group are official distributors for BayCom PCB's and Kits in the U.K.

    Home